有時候我們會碰到忘記Netscaler的密碼，或接手別人的設備而不知道密碼的情況。在這種情況下能看到但進不去，那感覺真是酸爽！如何初始化Netscaler的密碼，及時啟用手上的設備就很重要了。

創新互聯建站專注于蓮池企業網站建設,響應式網站設計,商城網站建設。蓮池網站建設公司,為蓮池等地區提供建站服務。全流程定制網站建設，專業設計，全程項目跟蹤，創新互聯建站專業和態度為您提供的服務

用console線連接到Netscaler，按啟動按鈕后會看到以下內容，按照如下提示操作即可

1.    Attach a console cable to the Serial Console (9600 baud, 8 bits, 1 stop bit, No parity) of the NetScaler appliance.

2.    Restart the NetScaler appliance.

3.    Press any of the following keys, as prompted:

Press Spacebar when the following message is displayed:

Hit [Enter] to boot immediately, or any other key for command prompt Booting [kernel] in 10 seconds

Press Ctrl and C keys simultaneously when the following message is displayed:

Press [Ctrl-C] for command prompt, or any other key to boot immediately.

Booting [kernel] in 2 seconds...

4.    To start the appliance kernel on a single user mode, enter the following command:

boot –s

Note: If boot -s does not work, then try reboot -- -s and appliance will reboot in single user mode.

5.    Press Enter when the following message is displayed:

Enter full pathname of shell or RETURN for /bin/sh:

Note: Notice that the prompt of the appliance changes to \u@\h\$.

6.    Run the following command to check the disk consistency:

\u@\h\$ /sbin/fsck /dev/ad0s1a（此命令一定要先執行，否則不能掛載/flash）

Note: Refer to the Knowledge Center article CTX121853 – Device Names Assigned to Hard Disk in Various Models of the Citrix NetScaler Appliance to verify the device name assigned to the hard disk of the appliance model and replace ad0s1a in the preceding command with the appropriate device name.

7.    Run the following command to display the mounted partitions:

df

8.    Run the following command to mount the flash drive:

\u@\h\$ /sbin/mount /dev/ad0s1a /flash( 一定要把flash掛上，否則看不到ns.conf）

If the preceding command fails to mount the flash drive, then run the following command to create the flash directory and then run the preceding command again to mount the drive:

\u@\h\$ mkdir /flash（如果有/flash可以不執行這步）

9.    Run the following command to change to the nsconfig directory:

\u@\h\$ cd /flash/nsconfig

10.   Run the following set of commands to rewrite the ns.conf file and remove the set of system commands defaulting to the nsroot user:

a. Run the following command to create a new configuration file that does not have commands defaulting to the nsroot user:

\u@\h\$ grep –v “set system user nsroot” ns.conf > new.conf（提取除nsroot用戶以外的其他配置到新文件）

b. Run a command similar to the following command to make a backup of the existing configuration file:

\u@\h\$ mv ns.conf old.ns.conf（備份原來的配置）

c. Run the following command to rename the new.conf file to ns.conf:

\u@\h\$ mv new.conf ns.conf（用沒有nsroot的配置啟動）

11.   Run the following command to restart the appliance:

reboot

12.   Log in to the appliance by using the default nsroot user credentials.

此時nsroot的密碼為初始化的密碼，直接輸入nsroot登陸即可

13.   Run the following command to reset the nsroot user password of your choice:

> set system user nsroot <New_Password>重新輸入密碼

另外有需要云服務器可以了解下創新互聯scvps.cn，海內外云服務器15元起步，三天無理由+7*72小時售后在線，公司持有idc許可證，提供“云服務器、裸金屬服務器、高防服務器、香港服務器、美國服務器、虛擬主機、免備案服務器”等云主機租用服務以及企業上云的綜合解決方案，具有“安全穩定、簡單易用、服務可用性高、性價比高”等特點與優勢，專為企業上云打造定制，能夠滿足用戶豐富、多元化的應用場景需求。

文章題目：Netscaler重置密碼的方法-創新互聯
新聞來源：http://www.2m8n56k.cn/article10/dhiego.html

成都網站建設公司_創新互聯，為您提供用戶體驗、品牌網站設計、企業網站制作、微信公眾號、響應式網站、品牌網站建設

廣告

聲明：本網站發布的內容（圖片、視頻和文字）以用戶投稿、用戶轉載內容為主，如果涉及侵權請盡快告知，我們將會在第一時間刪除。文章觀點不代表本網站立場，如需處理請聯系客服。電話：028-86922220；郵箱：[email protected]。內容未經允許不得轉載，或轉載時需注明來源： 創新互聯